knighty01 Posted February 19, 2013 Share Posted February 19, 2013 (edited) Hello, I am just creating a new car and I think I am having a problem with the dummies I am not exactly sure how to get this fixed so if you can please tell me how to fix it I would greatly appreciate it! Thanks in advance! EDIT: I also use 3ds max I prefer it way more then zmodeler so can you please explain it for 3ds max instead of zmodeler? Thanks! Edited February 19, 2013 by knighty01 Link to comment Share on other sites More sharing options...
knighty01 Posted February 19, 2013 Author Share Posted February 19, 2013 Oh and for I don't have to start a new topic there is also another problem I am having. the wheels are a little wobbly and I have messed with the dummies and the wheels and they still wobble. Link to comment Share on other sites More sharing options...
Tado Hamann Posted February 19, 2013 Share Posted February 19, 2013 • DOOR PROBLEM In Zmodeler : - Display... > Local Axes... (check Keep Object and select Offset). - Then click on "Reset to parent" under Local Axes. - Click on the door (if dummy is set correctly. If this not help you, take some screens. Link to comment Share on other sites More sharing options...
knighty01 Posted February 20, 2013 Author Share Posted February 20, 2013 • DOOR PROBLEM In Zmodeler : - Display... > Local Axes... (check Keep Object and select Offset). - Then click on "Reset to parent" under Local Axes. - Click on the door (if dummy is set correctly. If this not help you, take some screens. I don't use zmodeler can't stand it. Can you please explain in 3ds max? Link to comment Share on other sites More sharing options...
knighty01 Posted February 20, 2013 Author Share Posted February 20, 2013 Don't know if this will help but here's photo of the doors in 3ds max if you need any other kind of photo let me know! Link to comment Share on other sites More sharing options...
Tado Hamann Posted February 20, 2013 Share Posted February 20, 2013 The door dummy isn't good located. (if marked dummy if door dummy). >> Move (dummy only) to the door edge. (pic). Link to comment Share on other sites More sharing options...
knighty01 Posted February 20, 2013 Author Share Posted February 20, 2013 Ok if I do that then the door spawns up there. Trust me already tried that Link to comment Share on other sites More sharing options...
Tado Hamann Posted February 20, 2013 Share Posted February 20, 2013 No, door_xx_dummy must be placed in door edge, and door pivot must be in same position as dummy pivot. Link to comment Share on other sites More sharing options...
knighty01 Posted February 20, 2013 Author Share Posted February 20, 2013 ok that made the door spawn where I need it other then i need to do some small adjusting but the door opens really funny. Let me get a screen shot. Link to comment Share on other sites More sharing options...
knighty01 Posted February 20, 2013 Author Share Posted February 20, 2013 This is while the door is opening when it is closed it is almost right where I need it. Link to comment Share on other sites More sharing options...
Tado Hamann Posted February 20, 2013 Share Posted February 20, 2013 Yes, problem is with pivots, you can fix it with ZModeler, using my guide which I posted before. Link to comment Share on other sites More sharing options...
knighty01 Posted February 20, 2013 Author Share Posted February 20, 2013 Yes, problem is with pivots, you can fix it with zmodeler, using my guide which I posted before. I honestly suck with zmodeler and I don't have it anymore. I will just work with the pivots. Now there is another problem with the wheels they are a bit wobbly they stay where they need to but they wobble like axle of a car is broke. Do you by chance know how I would fix that? Link to comment Share on other sites More sharing options...
Tado Hamann Posted February 20, 2013 Share Posted February 20, 2013 Everything you say are problems with pivots, wheel' pivots & dummies must be placed in center of wheel model. Wheel's pivot must be in same position as dummy. (in center). Link to comment Share on other sites More sharing options...
knighty01 Posted February 20, 2013 Author Share Posted February 20, 2013 the wheel and the dummy pivots are center. Link to comment Share on other sites More sharing options...
Tado Hamann Posted February 20, 2013 Share Posted February 20, 2013 There are differences between wheel and wheel's pivot. I can't help you anymore wait for 3Ds Max guys. You can fix it with few clicks using zmod ... Link to comment Share on other sites More sharing options...
knighty01 Posted February 20, 2013 Author Share Posted February 20, 2013 (edited) Don't worry about it I got it working the pivots needed to be reset and everything I got the doors working just need to get the wheels to stop being wobbly and everything will be great! So go ahead and lock this topic guys!! Edited February 20, 2013 by knighty01 Link to comment Share on other sites More sharing options...
MrGTAmodsgerman Posted May 22, 2014 Share Posted May 22, 2014 Don't worry about it I got it working the pivots needed to be reset and everything I got the doors working just need to get the wheels to stop being wobbly and everything will be great! So go ahead and lock this topic guys!! Please can you tell me, what exactly you did? delink every part or what?? Please help, this pivot problem cut my release of a awsome car. Link to comment Share on other sites More sharing options...
_F_ Posted May 23, 2014 Share Posted May 23, 2014 Don't worry about it I got it working the pivots needed to be reset and everything I got the doors working just need to get the wheels to stop being wobbly and everything will be great! So go ahead and lock this topic guys!! Please can you tell me, what exactly you did? delink every part or what?? Please help, this pivot problem cut my release of a awsome car. I'm pretty sure he is not going to reply on this more than a year old topic. Anyways: Click on "Move and select" tool, then select the door, remember the coordinates. Then click on the door dummy (green square) Or just select it from hierachy list (H). Click on "Don't affect children" and write in the coordinates your remembered before MrGTAmodsgerman 1 GTA V cars to San Andreas gallery (Constantly updating) Link to comment Share on other sites More sharing options...
MrGTAmodsgerman Posted May 28, 2014 Share Posted May 28, 2014 Don't worry about it I got it working the pivots needed to be reset and everything I got the doors working just need to get the wheels to stop being wobbly and everything will be great! So go ahead and lock this topic guys!! Please can you tell me, what exactly you did? delink every part or what?? Please help, this pivot problem cut my release of a awsome car. I'm pretty sure he is not going to reply on this more than a year old topic. Anyways: Click on "Move and select" tool, then select the door, remember the coordinates. Then click on the door dummy (green square) Or just select it from hierachy list (H). Click on "Don't affect children" and write in the coordinates your remembered before Thanks for that interessting reply, but when i try "Don't affect children" i see the same numbers. I select the move mode like your picture, and the "Don't affect children" is activaded, what i have to do next? Disable this Button? Did i have to do the same thing on the rotationmode? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now