Help with changing size

[Dragonheart88]

hi, sry to ask this question but ive looked everywhere and i cant find where you change the wheel size on a car. i downloaded this mod to make the cheetah look like a lamborghini diablo, and the car looks great, exept for the wheel part, its has like these half monster truck wheels, and it looks kinda ridiculous so im wondering if there is any way of making them a little smaler by changing some nr in a file somewhere or do you have to ask the person that made the mod to make it smaller?

[AVTOMAN]

This is the original cheetah vehicles.ide:

 

415,  cheetah,  cheetah,  car,   CHEETAH,  CHEETAH,  null, executive,  5,  0, 0,  -1, 0.68, 0.68,  0

 

The red number indicates the type of management of tire: '-1' is the most used.

Tells the program to manage the size of the tread of the wheel, but

not the diameter. In most lower or raise the wheels off the ground.

With'0 'to manage the diameter of the wheel, but not the tread, but the wheels do not lower/rise from the ground. So to use '0', the wheels must touch the ground well.

If the wheels do not touch the ground, it need to change the wheel diameter in the DFF file.

The green number is the size of the front wheels, in%, compared to size of the 3D model (DFF files).

'0 .68 ' means 68% compared to the wheel 3D.

If you need to go above 100%, indicate: '1 .20 ' for example, to 120%.

The blue number indicates the size of the rear wheels.

The last number is:

'0 'For changes to the garage Transfender.

'1 'For the garage Wheels Arch Angel

'2 'For the garage of Gangs.

'-1' If no changes are possible.

Edited February 18, 2009 by Automan

[Dragonheart88]

hm, ty its works on some of the mods but not on everyone.

[NiSsAn_BoY]

What do you mean, now ive done this many times, I once made a donk and the only thing that changed was the wheel size in the garages, other than that the cars would look like they were floating