Picture Post & Commentary

[l3mmy]

It's a Spingy bath

I want one

[mr.blonde]

wheel from the Blonde Co.

i made this wheel in half hour,

but the all texture on the wheel is beta,i workin on the new textures

 

 

 

...and the tyre is not textured

Edited March 5, 2008 by mr.blonde

[Supra4]

hmm, how shall I put this ...

 

There's something really wrong with that rim. It doesn't have the wall that holds the tire. Dunno how to describe this without getting too technical, so I'll use a pic instead.

 

 

See that edge? Yours misses that. In the first corner, your tire will be pulled off the rim.

[Burner]

That towtruck is awesome. It looks like a polymonster.

 

Nice work on the dragger so far. As supra4 pointed out, the textures on the shell do look like conrete. What was wrong with the old shell that was in it originally?

 

Glad you got the paintjobs to work. That flame job is the first time I drew flames in photoshop. I think it could be better but oh well. It's nostalgic now being 4 years old Nice wheelie bars. I want those.

[Supra4]

 

As supra4 pointed out, the textures on the shell do look like conrete. What was wrong with the old shell that was in it originally?

 

Having seen it up closely in-game, I noticed it's actually diamond plate, so I'd like to withdraw that statement.

It's jut the pics that make it look like this.

 

And bad news on the wheelie handling. That's not going to happen. As soon as I go anywhere near wheelie settings, it starts to behave like a pig.

Also tried an adaptation of my hover car setting to make it lift the rear under accelleration, but that didn't work out either due to lateral body-roll being reverted.

But then again, even with those tires wheelspin is still realistic .

Edited March 6, 2008 by Supra4

[JasonThummel]

Its usually not realistic to make a car do wheel stands in a game that wasnt designed for it, theres always going to be some ridiculas trade off that usually isnt worth it. Personally I'd be happier with a drag car that can take corners aswell. Go with burnout/donut handling, that should be fun too

[Puma06111991]

Why is everybody talking about cars

 

 

 

 

 

 

 

[pinky]

Lol, nice.

 

Splish splash I was drivin' a bath.

Rubadub I had nitro in ma tub.

[Hegedus.Roberto]

***Grand Theft Auto: Mafia Stories***

Hellenbach GT - SA Styled

 

Original modell by: Rockstar games

 

News :

-Petrolcap

-Sa Lights

-3D Engine

-Exhausts

 

Other Work from me:

Banshee Hardroof and Spider

Edited March 6, 2008 by Hegedus.Roberto

[Picolini]

@Pinky, I knew before I checked back I'd see it in game

Looking good, keep it going. And I'd love to test this out when it's all textured and modeled up

Interested in seeing how the VTOL and gear stuff looks and works, should be great!

[buchsi]

Last paintjob done. I am... ready with it. Release soon.

 

[MindF*ck]

Nice work everybody

 

@ burner ... well, concerning the shell, the one that was in the original file is still there. but I needed an outside-shell in order to make it look good in SA when the body raises up. So I just mede one and applied a diamond plate texture, like Supra4 already mentioned. Do you think I should texture it differently? idk, it was just the best idea I had

 

@ Supra4 ... thanks for trying to do the wheeliehandling anyway I guess you stumbled over the same isues I faced when trying to do one. I think the handling is fine like it is right now

 

@ pinky ... I tried some various things to block CJ from entering on the right side. It is somehow accomplished with the collision, right? I just don't seem to get it done right! Can you give me some hints as to what I need to do?

 

 

 

Well then ...

I added another project to my "current-list"!

It's is again a hot rod, but this time not from Woofi, but made by me. It's a 1934 Ford Coupe, chopped, sectioned and channeled. The body is the well known free online model you can get almost everywhere, but heavily modified. The engine is a free model from turbosquid, but stipped down from 74000 to 18000 polys And well, everything else is my work, underbody, axles, wheels interior etc.

It's about 3 weeks work in the model, I majorly worked on it while being at home without internet, so this is the first time I show it.

 

 

a few mode pics here: gallery

 

I hope you like it

 

Greetz, MF

[JasonThummel]

Nice looking hotrod man.

 

 

[Hegedus.Roberto]

:LoL Nice Work buchsi! I like WAA cars

Nobody want say anything on my work?

LINK

[flashg]

Great work MF, you should also model more your own cars

[Supra4]

 

@ pinky ... I tried some various things to block CJ from entering on the right side. It is somehow accomplished with the collision, right? I just don't seem to get it done right! Can you give me some hints as to what I need to do?

Well, CJ can enter the car from both sides, but I tried to pick up one of the girlfriends and she refused to get in the passenger seat.

So only CJ can enter from the right side.

 

EDIT: Gorgeous rod BTW. I'd only raise the rear slightly compared to those pics. The position of the rear wheels just looks odd like this.

Edited March 7, 2008 by Supra4

[Hegedus.Roberto]

Here a LINK to my first works in the Team Mafia Stories

Edited March 7, 2008 by Hegedus.Roberto

[pinky]

 

Nice work everybody

 

@ burner ... well, concerning the shell, the one that was in the original file is still there. but I needed an outside-shell in order to make it look good in SA when the body raises up. So I just mede one and applied a diamond plate texture, like Supra4 already mentioned. Do you think I should texture it differently? idk, it was just the best idea I had

 

@ Supra4 ... thanks for trying to do the wheeliehandling anyway I guess you stumbled over the same isues I faced when trying to do one. I think the handling is fine like it is right now

 

@ pinky ... I tried some various things to block CJ from entering on the right side. It is somehow accomplished with the collision, right? I just don't seem to get it done right! Can you give me some hints as to what I need to do?

 

 

 

Well then ...

I added another project to my "current-list"!

It's is again a hot rod, but this time not from Woofi, but made by me. It's a 1934 Ford Coupe, chopped, sectioned and channeled. The body is the well known free online model you can get almost everywhere, but heavily modified. The engine is a free model from turbosquid, but stipped down from 74000 to 18000 polys And well, everything else is my work, underbody, axles, wheels interior etc.

It's about 3 weeks work in the model, I majorly worked on it while being at home without internet, so this is the first time I show it.

 

 

a few mode pics here: gallery

 

I hope you like it

 

Greetz, MF

Reduce the seat offset distance in the handling and move the passenger door dummy into the car centre, that should do the trick.

The coll for the passenger side needs to be of the flat poly type like rthe roof as well, I dont think the sphere type bar him from getting in.

Just put a strip in where the door is, there is no need to remove the spheres though as they are still needed for crash collisions.

 

Nice rod, ooer missus.

Edited March 7, 2008 by pinky

[Puma06111991]

That is a VERY nice Hotrod! I like the details and the quality, is it tunable too? Nice work!

 

Hadn't anything to do, Mr. V8 brought me on the idea:

 

 

[Mista_G]

@puma: is there a use to this mod? what purpose does it serve or is it just and upside down car, would be cool if you could have it so when it flipped you could get into the car that was originally on top which would be on the bottom lol then you'd never have to worry about damage cause you'd have 2 cars, you wouldn't have to go running around SA to find another lol great job and the idea would be cool if it was at all possible

[pgtipsp]

wow, i cant wait to drive that rod mindf*ck, it looks like a beaut - im loving the current influx of hot rods into sa, especially this one as its quite traditional and mean looking, the wheels are great too - cant wait!

[MindF*ck]

 

Thx, I'm glad you like my rod

 

@ supra4 ... well, the backwheels are exactly like I wanted them to be! As low as possible I took me quite some modifications to get that to work including a working suspension. So there is no way that I cange that

 

@ pinky ... special thanks to you again! I'm going to try that.

 

@ Puma06111991 ... Glad you like it! the only thing that will be tunable are nitro and wheels, since everything else doesn't quite fit to a hotrod.

Congrats also to your contantly amazing funstuff for SA! Your crazy ideas are a nice refresh for our community! Keep it up!

 

@ pgtipsp ... yeh, hotrodmania here! And guess what, all four (including this one here) are done by me ... well, the three released ones are modeled by Woofi, but I did the converting!

 

cu soon,

 

MF

[Puma06111991]

Hmk

 

 

 

Wip, enjoy.. Ingame you'll be able to drive over other vehicles .

[Supra4]

hmm ... that should give plenty of space for biiiiiiiiiiiiiiiig wheels. Could be interesting. maybe add a ladder or a staircase to it?

[buchsi]

Ok, the Curve is released. Next project...

 

 

San Andreas style ftw!

[|GTA Mallorca|]

Sexy Buchsi ! Echt geil...:-)

 

Well there arent many B3s in the Net,....

 

 

I hope i can finish it without any moddeling mistakes...

 

[ptkamikaz]

I haven't see any B3's, I know one for NFS, might convert it after I'm done my current project (1956 Chevy Bel Air)

[RoxRox]

 

Hummer H1...4-doors Open Top...to be)).

How come nobody commented on this?

 

It looks great.

 

Also, lovely VW, Mallorca.

 

edit: Nice car, buchsi. San An style ftw. I've got SA again... so you won't be alone in your SA style cars.

[JostVice]

 

Inspired in the defencer... a lot of work to do yet, the shape looks a bit strange, and i'm not happy with the size/height of it... 2500 polies now

[Supra4]

put a roof on it like the real one has. That should help. Also make the wheelarches a bit wider so that the doors are a bit deeper into the body.

 

@RoxRox : agreed, it looks pretty good ... but there is a perfect scratch-made H1 out there already.