san andreas gxt editor?

[Capushon]

Некоторые замечания по San Andreas GXT Editor версии 1.3

Чего бы очень хотелось увидеть в последующих версиях программы (этого критически не хватает):

 

1. Очень не хватает функции закладок по тексту. (хорошо бы их запоминать в .ini для доступности при следующей правке).

2. В правом окне нужен настраиваемый размер шрифта (сильно мелко править - глаза устают, а текста много).

3. Непомешало бы превью родным фонтом font2.bmp из игрушки, потому как бывает, что в левой панеле слово выглядит нормально, а в игре оно же - кракозябрами.

4. При экспорте - файл получается в прежней кодировке, даже если к нему был применён ползовательский фильтр, какой тогда смысл в экспорте?

5. При импорте из текстовика - необходимо как-то запретить замену английских букв русскими в строках с метками, например: SТЕAL_4, SYND_4C

6. Не всегда работает поиск после применения ползовательского фильтра.

7. Поиск не всегда находит менее 3-х букв (а если нужно найти часть слова, или букву - не порядок).

8. Неплохо бы опцию "найти все", с последующим отображением списка найденного и с возможностью изменений текста в этом окне (чтобы видеть все искомые места и не ползать по всему файлу).

9. Нет функции найти и заменить по всему файлу, или разделу.

10. Не работает отмена по Alt+BackSpace (Ctrl+Z как-то не очень удобно), в момент правки - нельзя сохранить файл по Ctrl+S.

11. В Windows XP - не сохраняются настройки позиции окна, ширины панелей, опции "Запоминать название записей", в Win 9x - с этим ok. Так может настройки лучше держать в .ini а не в реестре?

12. При редактировании строки в правом окне, для перехода на следующую приходится тыкаться мышом на следующую строчку. Нельзя ли как-то это делать клавишами?

13. Если мы нашли строку с помощью поиска, затем не убирая окна - правим ее, потом снова жмем искать далее, предыдущие изменения не сохраняются!!!

14. Неплохо бы в заголовке окна программы отображать имя редактируемого файла.

15. Хорошо бы иметь в программе несколько окон, т.е для того случая, когда необходимо смотреть в один .gxt а правиль другой и переключаться между ними. Прокрутка соответственно должна быль синхронной в обоих окнах.

16. Добавить в программу галочку "Всегда на весь экран".

17. Очень сложно изготовить собственный фильтр транслитерации! У меня ушло 2 дня, пока я понял фишку с заменой русских букв похожими английскими - иначе без этого ничего не работает (даже при одной единственной ошибке в подстановке букв).

18. Необходимо научить программу запоминать в настройках последнюю использованную таблицу символов (или выбрать ее по умолчанию).

19. Очень часто при поиске слов - виснет программа. :-(

 

 

зыж Надеюсь, я не утомил тебя ;-)

 

----------------------------------------------------------------------

Some remarks on San Andreas GXT Editor versions 1.3 What much wanted to see in the following version of the program (this critically comes short):

 

1. Much comes short functions a bookmark on text. (well their remember in .ini for accessibility under the following reading).

2. In right window needs the customizable size of the font (powerfully small to rule - an eye will grow old, but text much).

3. Nepomeshalo превью native фонтом font2.bmp from toy, therefore what can be that in left panel word looks orderly, but in play it - an кракозябрами.

4. At export - a file is got in former coding even though to him was aplying ползовательский filter, what then sense in export?

5. At import from текстовика - necessary somehow to forbid change an english letters russian in lines with mark, for instance: SТЕAL_4, SYND_4C

6. Not always works searching for after using ползовательского filter.

7. Searching for not always finds less 3-h letters (but if it is necessary to find the part of word, or letter - not order).

8. Quite well option "to find all", with the following image of the list found and with possibility of the change the text in this window (to see all sought places and not to creep on the whole file).

9. No functions to find and change on the whole file, or section.

10. Does Not work cancelling on Alt+BackSpace (Ctrl+Z somehow not much comfortable), at moment of the reading - it is impossible save the file on Ctrl+S.

11. In Windows XP - are not saved adjustment to positions window, widths of the panels, options "to Remember the name of the record", in Win 9x - with this ok. So can adjustment better to keep in .ini rather then in roll?

12. When editing the line in right window, for turning on should happens to to bang into the мышом on following line. It is impossible somehow this does the key?

13. If we have found the line by means of searching for, then not taking away window - shift to the right her(it), afterwards once again жмем to search for hereinafter, previous change are not saved!!!

14. Quite well in headline window program to display the name of the editable file.

15. Well have in program several windows i.e therefor event, when necessary to peer into one .gxt but rule another and be switched between them. The Scrolling accordingly must быль synchronous in both window.

16. Add in program mark "on the whole screen" Always.

17. Much in a complicated way make the own filter to transliterations! Beside I have left 2 days while I have understood the chip with change the russian letters by similar englishes - otherwise without this nothing do not work (even under one single error in substitution of the letters).

18. Necessary to teach the program to remember in adjustment last used table symbol (or choose her(its) by default).

19. Much often at searching for of the words - виснет programma. :-(

 

 

 

[JernejL]

I made another gxt editor:

 

 

get it HERE.

 

it is different from others a little but is also much faster as it first converts the gxt file to text file similar to .INI files which are very easy to edit.

 

[random_download]

 

whoa, that is fast. Good job.

[DiCanio]

cheers Delfi

 

looks good

 

any chance of a wee tool to convert binary

IPL files to plain text?

[JernejL]

sorry to everyone who downloaded it and got his gxt file unreadable by the editor itself (but the game still loads them), i fixed this issuse altrough old files cannot be fixed

 

i also fixed the fila asociation so you can now doubleclick a gxt file and it will open it, drag & drop was also added, and when you save file it now removes the read only attribute

 

 

the updated file is here:

http://www.gtatools.com/pafiledb/uploads/gta_sa_gxt.rar

 

[Jim-Reflex]

PLz help I need the originall Amarican.gxt File i lost it

[JernejL]

PLz help I need the originall Amarican.gxt File i lost it

how could you have lost a computer file?

 

[Jim-Reflex]

I edit it and now it dont works anymore i cant open it so = Lost

[DexX]

Hammer i get this error if i associate your program with .gxt files, then try to open one by double-clicking the .gxt file itself -

click here if image doesn't load

 

it still works, opening, editing and saving, and will still load ingame. just an annoyance. if i load the program first, then open a gxt file "manually" there's no trouble at all.

 

Great tool otherwise

[Hammer83]

Yes, I noticed it too on my computer I'm just too lazy to release a new version.

[AleX AciD]

Damn! This works for the example I gave but not for

INTRO_2 -> 6048D1A9

 

Nice try, but it doesn't work.

Maybe this helps...

 

void CalcCrc(void){   // table used in CRC calculation   unsigned long table[256] = {       0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA,       0x076DC419, 0x706AF48F, 0xE963A535, 0x9E6495A3,       0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988,       0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91,       0x1DB71064, 0x6AB020F2, 0xF3B97148, 0x84BE41DE,       0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7,       0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC,       0x14015C4F, 0x63066CD9, 0xFA0F3D63, 0x8D080DF5,       0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172,       0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B,       0x35B5A8FA, 0x42B2986C, 0xDBBBC9D6, 0xACBCF940,       0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59,       0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116,       0x21B4F4B5, 0x56B3C423, 0xCFBA9599, 0xB8BDA50F,       0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924,       0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D,       0x76DC4190, 0x01DB7106, 0x98D220BC, 0xEFD5102A,       0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433,       0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818,       0x7F6A0DBB, 0x086D3D2D, 0x91646C97, 0xE6635C01,       0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E,       0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457,       0x65B0D9C6, 0x12B7E950, 0x8BBEB8EA, 0xFCB9887C,       0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65,       0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2,       0x4ADFA541, 0x3DD895D7, 0xA4D1C46D, 0xD3D6F4FB,       0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0,       0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9,       0x5005713C, 0x270241AA, 0xBE0B1010, 0xC90C2086,       0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F,       0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4,       0x59B33D17, 0x2EB40D81, 0xB7BD5C3B, 0xC0BA6CAD,       0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A,       0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683,       0xE3630B12, 0x94643B84, 0x0D6D6A3E, 0x7A6A5AA8,       0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1,       0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE,       0xF762575D, 0x806567CB, 0x196C3671, 0x6E6B06E7,       0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC,       0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5,       0xD6D6A3E8, 0xA1D1937E, 0x38D8C2C4, 0x4FDFF252,       0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B,       0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60,       0xDF60EFC3, 0xA867DF55, 0x316E8EEF, 0x4669BE79,       0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236,       0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F,       0xC5BA3BBE, 0xB2BD0B28, 0x2BB45A92, 0x5CB36A04,       0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D,       0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A,       0x9C0906A9, 0xEB0E363F, 0x72076785, 0x05005713,       0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38,       0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21,       0x86D3D2D4, 0xF1D4E242, 0x68DDB3F8, 0x1FDA836E,       0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777,       0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C,       0x8F659EFF, 0xF862AE69, 0x616BFFD3, 0x166CCF45,       0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2,       0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB,       0xAED16A4A, 0xD9D65ADC, 0x40DF0B66, 0x37D83BF0,       0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9,       0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6,       0xBAD03605, 0xCDD70693, 0x54DE5729, 0x23D967BF,       0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94,       0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D   };   unsigned long reg;  // register for CRC   char *string;       // pointer to string for CRC calculation   // sample strings ( string=crc )   // 'CDERROR'=EF128EC3   // 'INTRO_1'=3DFE5E49   char cderror[] = "CDERROR";   char intro_1[] = "INTRO_1";   // CRC calculation   string = cderror;  // select string   reg = 0xFFFFFFFF;  // set base register value   while(*string != '\0')   {       reg = (reg >> 8) ^ table[*string ^ (reg & 0xFF)];       string++;   }   // here we have CRC stored in 'reg'}

 

[AleX AciD]

If someone needs GTA-SA gxt id (names) list, it can be downloaded from here or here.

(It's almost full list, containing 13200 entries)

[spec0071]

...

Edited December 28, 2008 by spec0071

[oCain]

...

 

... could someone tell me the Entry-Names of the Radio-Channels or maybe how to find/read them?

 

Thanx....

 

Edit--->

Ok, ok, ok...I've found it!!!

 

Thanx to AleX AciD...I've used your List. (FEA_...)

 

Now I can go sleep....

Edited March 26, 2006 by oCain

[ceedj]

If someone needs GTA-SA gxt id (names) list, it can be downloaded from here or here.

(It's almost full list, containing 13200 entries)

This is an excellent resource.

 

Thanks very much!

[J-Fox.GEMM]

Is there an editor which shows Text string names too? :S

 

Like: TX_SEQ etc.

 

I really need it lik that...

[NPIK]

 

To edition GXT files I use  [Great editor for me]

 

 

Hi all!, Where download? Zverik's GXT Editor 1.3

[AleX AciD]

 

Hi all!, Where download? Zverik's GXT Editor 1.3

On previous page!

Edited April 16, 2006 by AleX AciD

[tomworld10]

Hi,

 

If you're reading this topic you'd probably like to see that GTAForums.com>>GTA Modding>>Mission Coding>>Generic SA SCM Documentation

 

You'd really like it.

 

 

 

Have fun

[yogihw]

hey all

 

I made a VB-based string to hex conversion tool based on AleX AciD's CRC32 algorithm. it's useful when/if you want to add custom messages in your main.scm, cuts.img, or scripts.img. maybe there's already a tool out there that does this, but I couldn't find one so I made one myself.

 

if anyone is interested I'll have it posted here http://www.wiputra.com/files/CRCCalc2.rar

[farazmobin]

nice yogi!

[Aschratt]

If someone needs GTA-SA gxt id (names) list, it can be downloaded from here or here.

(It's almost full list, containing 13200 entries)

Can anyone please upload it? Links are dead...

 

Thanx!

[AleX AciD]

 

Can anyone please upload it? Links are dead...

Here: gta-sa-id-list.zip

15840 entries!

[sonic030]

Non download available

[DJSiddall]

anyone know how i can translate russian subs to english for gta alien city ?

[shindogg]

well http://suchy63.rhlmod.ru/files/gtasa/sagxtedit_rus.zip is dead so upload it somewhere else. if i can get this workin, maybe anderius will become playable.

[fireguy109]

well http://suchy63.rhlmod.ru/files/gtasa/sagxtedit_rus.zip is dead so upload it somewhere else. if i can get this workin, maybe anderius will become playable.

Nice bump. Over a year old topic, how did you even find this?