Quantcast

Jump to content

» «
Photo

Modding the Buffalo

8 replies to this topic
Omina
  • Omina

    Player Hater

  • Members
  • Joined: 07 Aug 2014
  • United-Kingdom

#1

Posted 07 August 2014 - 12:58 AM

I have this recurring issue where if I mod the Buffalo, the mod turns out fine except the car is raised up on it's suspension as if it were already on hydraulics. This occurs with practically every single mod except the stock Buffalo itself.

 

Here are some examples:

 

02uGhLjl.jpg

NibF9NVl.jpg

uEgO4H0l.jpg

 

 Is there any way I can fix this? Thanks in advance.


Danikov
  • Danikov

    The Fake Russian

  • Members
  • Joined: 27 Aug 2009
  • Israel

#2

Posted 07 August 2014 - 05:58 AM

I have this recurring issue where if I mod the Buffalo, the mod turns out fine except the car is raised up on it's suspension as if it were already on hydraulics. This occurs with practically every single mod except the stock Buffalo itself.
 
 Is there any way I can fix this? Thanks in advance.


Yes,you can adjust ride height by changing the 'Lower Limit' value that is defined for the Buffalo in the handling.cfg.

This value is usually negative,the more negative it is,the higher the ride height will be. So what you need to do is to add to this value about 0.1-0.15,if its not the way you want it to be,continue adding smaller values.
  • Omina likes this

Omina
  • Omina

    Player Hater

  • Members
  • Joined: 07 Aug 2014
  • United-Kingdom

#3

Posted 07 August 2014 - 04:10 PM

Thanks so much man, I figured it all out.


Automan
  • Automan

    Grandfather Modder

  • Members
  • Joined: 13 Dec 2008
  • Italy

#4

Posted 08 August 2014 - 02:34 PM

Danikov, I have a car with the wheels bouncing over the fender... 
Which parameter handling must decrease?... 
All I know it does not work... :/

BMWSauberF1.08
  • BMWSauberF1.08

    San Andreas Rewind Vehicle Artist

  • Feroci
  • Joined: 03 Sep 2013
  • Italy
  • Contribution Award [Mods]

#5

Posted 08 August 2014 - 08:02 PM

i think that u have set the forcing level


Danikov
  • Danikov

    The Fake Russian

  • Members
  • Joined: 27 Aug 2009
  • Israel

#6

Posted 08 August 2014 - 09:51 PM


Danikov, I have a car with the wheels bouncing over the fender... 
Which parameter handling must decrease?... 
All I know it does not work... :/


What do you mean by bouncing over the fender? The wheels are above the fenders whole the time or when the wheel is bumped up,it shows through the front/rear part of the vehicle?

BMWSauberF1.08
  • BMWSauberF1.08

    San Andreas Rewind Vehicle Artist

  • Feroci
  • Joined: 03 Sep 2013
  • Italy
  • Contribution Award [Mods]

#7

Posted 09 August 2014 - 06:27 AM

I think that he means that when the car does a jump and lands,the wheels will pass through the fender.
You can edit the force level and set and higher number

Automan
  • Automan

    Grandfather Modder

  • Members
  • Joined: 13 Dec 2008
  • Italy

#8

Posted 09 August 2014 - 08:52 AM

Yes, when the wheel is bumped up, it shows through the front/rear part of the vehicle.
Increase 'Damping Level' has not solved the problem. 
I lowered 'Upper Limit' from 0.2 to 0.05, and it works. 
Strange: I remembered so that the wheel was crushed to the ground, 
as if the vehicle had sat Godzilla! XD 
 
OT. I take advantage of your attention to a question: 
In GTA-V in which files are told what type of wheel has a vehicle?...
Vehicles?.. Handling?... Carmods?...
I can download it from somewhere?... 
Very thanks! :D

Danikov
  • Danikov

    The Fake Russian

  • Members
  • Joined: 27 Aug 2009
  • Israel

#9

Posted 09 August 2014 - 09:20 AM

Yes, when the wheel is bumped up, it shows through the front/rear part of the vehicle
OT. I take advantage of your attention to a question: 
In GTA-V in which files are told what type of wheel has a vehicle?...
Vehicles?.. Handling?... Carmods?...
I can download it from somewhere?... 
Very thanks! :D


No bloody clue.

As for the damping,pretty sure what it does is controling the amount of how "soft" and swinging the suspension is.




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users